Trades and services

Route planner for contractors and field service technicians

Contractors rarely have 50 stops a day, but customers are spread far apart. Even with six jobs, the order makes a difference of many miles – as the example route shows.

Plan a route for free

In the sample route below: 29% shorter than unsorted. Up to 25 stops with no sign-up and nothing to install.

Example route: Service day with 6 jobs from the shop

6 5 4 3 2 1 S
List order (straight lines) Optimized route (roads) Road data © OpenStreetMap contributors
Order as entered
45.0 mi · 1 hr 36 min
Optimized
31.8 mi · 1 hr 19 min

29% shorter · 17% less driving time

  1. Shop
  2. Job 5 – water heater install 6.0 mi
  3. Job 1 – AC tune-up 3.8 mi
  4. Job 4 – garage door repair 5.6 mi
  5. Job 3 – estimate 2.9 mi
  6. Job 6 – AC tune-up 5.8 mi
  7. Job 2 – replace faucet 5.2 mi
  8. Back to start 2.5 mi

Fictional stops in the Phoenix area. Distances and driving times measured on October 30, 2026 with openrouteservice.org (HeiGIT); order calculated with the RouteTidy optimizer (provably best order).

What makes planning hard

  • Job length is hard to predict

    A tune-up takes thirty minutes or two hours. Driving time, on the other hand, can be planned – and cut.

  • Parts and supply houses

    Often you need to pick up parts at the supply house on the way. The supply house is then a stop like any other.

  • Large service area

    Customers in town and out in the suburbs: that is where most empty miles come from.

How to plan the route with RouteTidy

  1. Collect your stops

    Paste addresses from your job or customer list or import a CSV or Excel file. Regular customers are ready in your address book.

  2. Set start and end

    Depot, office or home as the start; then a round trip, an open end at the last stop or a fixed destination.

  3. Optimize with one click

    RouteTidy works out the order from real driving times and shows distance and time before and after.

  4. Hit the road

    Share the route as a driver link, open it in Google Maps or print a list – then drive stop by stop with the navigation app you already use.

Practical tips

  • Group maintenance by area

    Schedule recurring maintenance by location rather than by due date.

  • Add the supply house as a stop

    If you need parts, include the supply house as a stop on the route.

  • Leave room for emergency calls

    If you take emergency calls, plan with slack and re-optimize the rest of the day after one.

  • Give customers an arrival window

    With the order and driving times, you can give customers a realistic arrival window.

What RouteTidy is good for

Good fit

  • Service and maintenance with 3 to 20 jobs
  • Service areas covering city and suburbs
  • Round trips from the shop or home

Not a fit (yet)

  • Job management, estimates and invoices
  • Dispatching many technicians at once

Questions

Is a route planner worth it for five customers a day?

Often yes: with five customers there are 120 possible orders, and when customers are spread out, a good and a bad order are many miles apart.

Can I add the supply house as a stop on the way?

Yes, as a normal stop on the route. The optimization cannot yet make sure it comes before a particular customer.

Is there an app?

RouteTidy runs in the browser on phones, tablets and computers – no installation needed.

The example route is real – calculated with the same optimization the planner uses. Try it with your own route. Go to the planner · See all features

More use cases

See all use cases